Tormek

Protect your beloved Tormek Sharpening System with the MH-380 Machine Cover. Yes, your machine is durable and doesn't require a cover. However, i...

The MSK-200 is a replacement stainless main shaft for the Tormek T-4. It includes all the nuts washers and pins needed for proper replacement. W...

The MSK-250 replacement stainless main shaft for the Tormek T-7 and T-8. It includes all the nuts washers and pins needed for proper replacement....

Okay, I'll admit it is hard to get too excited about labeling your turning tools. However, labeling the settings for each of your turning tools i...

The SVD-005 is the upgrade kit for the Tormek SVD-180. This upgrade kit brings your older SVD-180 to the specifications of the SVD-185. Includes ...

The US-103 is very worthwhile upgrade to your older Tormek 1200 or use it as an additional support for your T-4. This is the same piece that com...

A very worthwhile upgrade to your Tormek T-8, T-7 or 2000 model is to have an additional US-105 Universal Support. This is the same piece that c...

Sharpen Longer and Wider Tools The Extended Universal Support is for sharpening long or wide tools such as long knives, cleavers and machetes. At ...

This nut is a direct replacement for your T-7 / T-8 / T-4Universal Support. AKA Part Numbers R-1162, TOR-1162, 1162. Included with US-105 Universa...

The book is enclosed with each Tormek T-7 machine. You can purchase a second to keep by your bedside or you can replace your older edition with b...

This is the replacement base found on the Tormek T7. It can be used to upgrade your Tormek Supergrind 1200 and Supergrind 2000. Includes all nec...

Tormek Drive Wheel With Friction Ring. Fits the T8, T7 and 2000 models. With the introduction of the T8 model, the Drive Wheel was changed to hav...

Tormek Drive Wheel With Friction Ring. Fits the T-1 models. This is the replacement drive wheel for the Tormek T-1 Kitchen Knife Sharpener. It does...

Rotate your Tormek! Some tools are best sharpened with the stone running towards the edge and other tools should have the stone running away from t...

The ADV-D Diamond Exchange Tip is used with the Tormek Truing Tool. It is a direct replacement for the Diamond Tip that comes with the Truing Too...

The OWC-1 is an attachment to adapt the Tormek Bench Grinder Mounting Kit BGM-100 directly to a Wolverine v-arm.* Mounting on a Wolverine v-armI...

If you already have a Wolverine* v-arm on your grinder, now you can use the Tormek jigs as well. The OWC200 provides you with a Tormek Universal S...

With the RM-533 Tormek Rubber Work Mat you get a water proof yet non slip surface. The raised rim will retain any water spillage. 533×343 mm (21"...

This Tormek T4 Water Trough is a direct replacement for the trough that comes with the Tormek T4. Will also fit the T3 model. Tormek Part #R3176

This Honing Wheel is the one that is included with the T1 Kitchen Knife Sharpener and the Tormek T2 Pro Kitchen Knife Sharpener, and it is ideal f...

This Tormek T8 Water Trough is a direct replacement for the trough that comes with the Tormek T8. It fits only the T8 model Tormek. If you have a S...

The replacement scraper for the Tormek T-8 Water Trough Scraper is the replacement scraper for the Tormek T-8 Water Trough (R3090). The Scraper inc...

Makes Water Non-Corrosive Add Tormek SCC-150 Anti-Corrosion Concentrate to water at a ratio of 10ml of concentrate to 250ml of water before fill...

Have More Tormek Grinding Wheels than places to put them? These are extra hooks for the Tormek Sharpening Station.

Tormek Ezy Lock Nut A replacement Ezy Lock Nut for the T-7 / T-8. Note that the Ezy Lock Nut is not compatible with older model shafts. If you...

Tormek EM-15 Edge Marker This high-quality, permanent marker with a chisel tip makes it easy to color the bevel when you want to find and repli...

Rotary Blades By Any Name We've heard them called gyro-cutters, kebab knifes and shawarma slicers, and there's probably more names out there as w...

Tormek Ezy Lock Knob for the T-4 This is a direct replacement for the Ezy Lock Knob found on the Tormek T-4, T-4 Bushcraft Edition and T-2 models...

Drive Wheel with Friction Ring for T-4 / T-3 / T-2  Replacement Tormek Drive Wheel. Replaces worn out drive wheels for the Tormek T-4 / T-3 / T-2...

Locking Screw Tormek Part #R7190 AKA 7190 Item #10 On SE-77 Square Edge Jig Parts Breakdown Diagram

Locking Knob for DBS-22 Drill Bit Attachment Tormek Part #R7140 7140 Item #5 On DBS-22 Drill Bit Attachment Parts Breakdown Diagram

Sliding Film for SVH-320 Planer Blade Attachment Tormek Part #R9494 AKA 9494 Item #4 on SVH-320 Planer Knife Attachment Parts Breakdown Diag...

Sliding Film for SVP-80 Molding Knife Attachment Tormek Part #R9498 AKA 9498 Item #2 On SVP-80 Molding Knife Attachment Parts Breakdown Diag...

Locking Screw M8x30 KH Tormek Part #R7110 AKA 7110 Item #10 On SVD-186 Gouge Jig Parts Breakdown Diagram Item #5 On SVD-185 Gouge Jig Parts...

Sliding Film for SVX-150 Scissors Jig Tormek Part #R9492 AKA 9492 Item #9 On SVX-150 Scissor Jig Parts Breakdown Diagram

Machine Label T-4 EN/FR 115V Tormek Part #R7960 AKA 7960 Item #20 On T-4 Parts Breakdown Diagram