Tormek Replacement Parts

Tormek Ezy Lock Nut A replacement Ezy Lock Nut for the T-7 / T-8. Note that the Ezy Lock Nut is not compatible with older model shafts. If you...

Guide Bar for SVM-00 Small Knife Jig Tormek Part #R0150 AKA 0150 Item #1 in Parts Diagram in SVM-00 Instructions

Storage Plate WM-200 Tormek Part #R0180 AKA 0180 Metal plate and adhesive to hold it to the body of the T-8. This plate allows the magnets on...

Washer for Stone T-4 Tormek Part #R0190 AKA 0190 Item #29 on T-4 Parts Breakdown Diagram

Support Plate for SVX-150 Scissors Jig Tormek Part #R0230-07 AKA 0230 Item #1 on SVX-150 Parts Breakdown Diagram

Spring for SVH-320 Planer Blade Attachment Tormek Part #R0540 AKA 0540 Item #13 on SVH-320 Planer Blade Attachment Parts Breakdown Diagram

PTFE Lubricant Tormek Part #R0740-07

Leather Honing Wheel Oil Tormek Part #R0790-07

Spring for Water Trough Tormek Part #R0800 AKA 0800 Item #78 on T-8 Parts Breakdown Diagram

Brass Bushing M6 Tormek Part #R1050 AKA 1050 Item #8 on SVS-50 Multi Jig Parts Breakdown Diagram Item #3 on SVS-38 Short Tool Jig Parts Bre...

Brass Bushing M8 Tormek Part #R1070 AKA 1070 Item #9 on SVS-50 Multi Jig Parts Breakdown Diagram Item #7 on SVD-186 Gouge Jig Parts Breakdow...

Stop Ring for various Jigs Tormek Part #R1091 AKA 1091 Item #4 on SE-77 Square Edge Jig Parts Breakdown Diagram Item #7 on SVD-185 Parts Bre...

Capacitor 115v/10uF for T-4 Tormek Part #R115/10UF

Capacitor 115v/25uF for T-8 Tormek Part #R115/25UF

Disc and O-Ring for SVS-50 Multi Jig Tormek Part #R1180 AKA 1180 Item #10 on SVS-50 Parts Breakdown Diagram

Outer Stop for SE-77 Tormek Part #R1185 AKA 1185 Item #9 on SE-77 Square Edge Jig Parts Breakdown Diagram

Shaft for LA-120 Profiled Leather Honing Wheels Tormek Part #R1240 AKA 1240 Item #1 on LA-120 Profiled Leather Honing Wheels Parts Breakdown ...

Metal Contact Discs for TTS-100 Turning Tool Setter Tormek Part #R1250 AKA 1250 Item #2 on TTS-100 Turning Tool Setter Parts Breakdown Diagr...

Locking Screw for DBS-22 Drill Bit Sharpening Attachment Tormek Part #R1290 AKA 1290 Item #7 on DBS-22 Drill Bit Sharpening Attachment Parts...

Nut for SE-77 Square Edge Jig Tormek Part #R1410 AKA 1410 Item #5 on SE-77 Square Edge Jig Parts Breakdown Diagram

Clamp for SVX-150 Scissors Jig Tormek Part #R2040 AKA 2040 Item #3 on SVX-150 Scissors Jig Parts Breakdown Diagram

Drive Wheel with Friction Ring for T-4 / T-3 / T-2 / T-1 Replacement Tormek Drive Wheel. Replaces worn out drive wheels for the Tormek T-4 / T-...

Open Seat with Bushing for SVS-50 Multi Jig Tormek Part #R2210 AKA 2210 Item #3 on SVS-50 Multi Jig Parts Breakdown Diagram

Knife Holder with Magnet for SVP-80 Molding Knife Attachment Tormek Part #R2280 AKA 2280 Item #4 on SVP Molding Knife Attachment Parts Break...

Arm for SVP-80 Molding Knife Attachment Tormek Part #R2290 AKA 2290 Item #10 on SVP-80 Molding Knife Attachment Parts Breakdown Diagram

Sliding Film for SVH-320 Planer Blade Attachment Tormek Part #R9494 AKA 9494 Item #4 on SVH-320 Planer Knife Attachment Parts Breakdown Diag...

Tormek Drive Wheel With Friction Ring. Fits the T8, T7 and 2000 models. With the introduction of the T8 model, the Drive Wheel was changed to hav...

Disc with O-Ring for SVD-186 Gouge Jig Tormek Part #R2530 AKA 2530 Item #4 on SVD-186 Parts Breakdown Diagram.

Rubber for SVA-170 Axe Jig Tormek Part #R3030 AKA 3030 Item #2 on SVD-186 Parts Breakdown Diagram.

Knobs for SVP-80 Molding Knife Attachment Tormek Part #R3040 AKA 3040 Item #9 on SVA-80 Parts Breakdown Diagram.

Adjustable Stop with O-Ring Tormek Part #R3050 AKA 3050 Items #2 and #8 on SVD-140 Long Knife Jig Parts Breakdown Diagram Items #2 and #8 on...

Nylon Bearing This is the bearing, sometimes called by Tormek a bushing, for the main shaft on most Tormek machines. Tormek Part #R3061 AKA ...

This Tormek T8 Water Trough is a direct replacement for the trough that comes with the Tormek T8. It fits only the T8 model Tormek. If you have a ...

The replacement scraper for the Tormek T-8 Water Trough Scraper is the replacement scraper for the Tormek T-8 Water Trough (R3090). The Scraper inc...

Jig Bushing Package contains one bushing. Tormek Part #R3120 AKA 3120 Item #6 on SVD-186 Gouge Jig Parts Breakdown Diagram Item #20 on SVD-...