For all shapes and makes of moulding knives with 24, 30 or 38 mm distance between guide holes. Sharpens the face of the blade and therefore any shapes can be done. Max width of blades 100 mm (4").
The attachment comprises a base (1), a knife holder (2), an extra Universal Support (3) with micro adjust (4) and two pairs of hollow pins (5 and 6) for the knife holder.
The base is mounted on this extra Universal Support and on the existing Universal Support of the machine. The base is locked with the screw (7). An arm (8), which is locked with an adjustable hand lever (9), stabilizes the construction.
The knife is placed on the pair of hollow pins on the knife holder. A magnet (13) keeps the knife in place. The holder has holes to fit various knife standards. Two pair of pins (Ø4 and Ø5 mm) come with the jig.
The knife holder (2) glides on the base (1), which has PTFE surfaces to minimize the friction. The knives are ground on the face. Adjusting the nut on the horizontal Universal Support sets the grinding depth.
PDF Moulding Knife Attachment SVP-80 Instruction.
Moulding Knives with 24, 30 or 38MM distance between guides.
Q. Is this jig compatible with any model Tormek Sharpener?
A. Yes. This jig will work with the larger Tormek T8, as well as older models like the T7, and 2000. It is not recommended for use with the smallerTormek T4