A Complete Lawn Mower Blade Sharpening System
This kit has everything you need to sharpen lawn mower blades. A Grinder, dust collector and blade balance with a stand and all the attachments needed to mount everything.
The Kit Contains:
MAG-8100 1/2hp Sharpener
MAG-200-4H Dust Collector
- The Magna-Matic 8100 1/2hp Standard Lawn Mower Blade Sharpener has an incredibly rigid design that delivers smooth, solid grinding, and makes sharpening conventional flat mower blades comfortable and easy. The Magna-Matic 8100 makes it easy to maintain a 30 degree cutting edge angle without complicated adjustments or time consuming tools. A single crank raises and lowers the wheel, and it stays where you adjust it. Simply lower the wheel until it almost touches the worktable, and it will cut a 30 degree angle (+ or - 0.5 degrees) over the life of its 7" diameter grinding wheel. Sharpen any length cutting edge. Sharpen right or left-handed blades. Sharpen a commercial mower blade in 1-2 minutes without burning the single direction motor.
MAG-10400 Service Center Stand
Magna-Matic Blade Balancer
- The MAG-200-4H Dust Collector is specifically set up to collect dust from the 8100 sharpener. It features 3 stages of filtration that safely draw live sparks, dust, and grit.
Mounting Brackets for Dust Collector
The MAG-1000 Blade Balancer mounts on the wall allowing the blade to hang in a horizontal balance position. Strong magnets hold the blade in place. Cone size fits blade hole widths 5/16" to 1-1/2" diameter. Made of the finest precision steel for a long life. Special sealed bearings for precision balancing.
Dust Collection Connector
The MAG-200-20-KIT consists of 4 brackets that provide a way to mount a Magna-Matic dust collector to the MAG-10400 Sharpener Service Center Stand. With these brackets, you can mount the MAG-200-4H dust collector to the stand. The brackets come with all the necessary hardware for mounting to a Magna-Matic stand.
Made in the USA by Magna-Matic