![Work Sharp Ken Onion Edition Knife Sharpener](http://www.sharpeningsupplies.com/cdn/shop/files/WSKTS-KO-z_989x700.jpg?v=1714071832)
Work Sharp Ken Onion Edition Knife Sharpener
- Sharpens All Types of Knives
- Angle Adjusts From 15 to 30 Degrees
- New Variable Speed Motor
- Includes 5 Belts
- Replacement Belts and Accessories
The Work Sharp Ken Onion Edition Knife and Tool Sharpener is the most versatile electric sharpener we've tested. You will get consistently sharp edges quickly and easily!
Work Sharp partnered with legendary knife maker and designer, Ken Onion, on their top-of-the-line knife sharpener. The Ken Onion Edition Knife and Tool Sharpener features a fully adjustable sharpening guide, variable speed motor and wide flexible abrasive belts to sharpen any size, shape or type of knife you own. Professional knife makers like Ken Onion use flexible belts to put a razor-sharp edge on their blades, now you can have the same technology for your own knives.
Unlike some electric sharpeners, the new Ken Onion Edition features adjustable sharpening guides. You can sharpen an edge from a very low 15-degree angle all the way up to 30 degrees (in 1-degree increments). This allows you to put a super fine edge on one knife and seconds later adjust the guide to put a very durable edge on another knife. This ease of adjustment allows you to sharpen just about any knife.
The new variable speed motor is powerful and versatile. This variable speed allows you to increase the speed for faster sharpening or decrease it for a more precise approach. The variable speed is managed through the trigger, the more you pull the faster it goes.
The combination of belts, adjustable guides, and variable speed motor gives this sharpener the versatility to sharpen almost any knife. Many electric sharpeners specialize in sharpening one type of knife while the Work Sharp Ken Onion Edition can sharpen them all and do so very well. Some of the toughest knives to sharpen are knives that have a re-curve or a concave edge. However, the flexible belt design allows you to sharpen these knives with ease and control. Even serrated knives have very small tight curves called gullets that can be sharpened with this sharpener. The most difficult concave curve is on a gut hook and the Ken Onion Edition has no trouble with it.
With the popularity of Japanese and similarly styled knives, there is a need to sharpen knives to a lower angle. While some sharpeners only give you a 20-degree angle, the Ken Onion Edition can quickly change all the way down to 15 degrees to match the factory edge on Japanese cutlery.
This versatile sharpener will also tackle scissors and tools. A scissors guide will easily and quickly sharpen common household scissors to a 60° angle with no set up time. And with a quick rotation of the sharpening cassette, the Ken Onion Edition Knife and Tool Sharpener will sharpen a wide range of common shop and garden tools such as axes, shovels, pruners, and more.
You'll notice the heft and quality construction of this sharpener. If you're familiar with the original Work Sharp Knife Sharpener, you'll notice that the Ken Onion Edition weighs twice as much as the original. This additional weight comes from the larger variable speed motor, larger overall size, and cast metal components.
The Work Sharp Ken Onion Edition Knife and Tool Sharpener includes 5 belts (one of each: P120, X65, X22, X4 and 6000 grit). The five belts (detailed below) offer you a wide range of grits to perform tasks as coarse as grinding and as fine as polishing an edge. This system accommodates larger 3/4" belts. These larger belts are not just wider but also very long-lasting. Just a few minutes with this sharpener and you'll immediately notice the difference.
P120 Grit Belt
The P120 is a coarse belt that can be used for grinding or for fast stock removal from knives. This is a quality coated 3/4" x 12" fabric belt.
Norton Norax Belts
There are three 3/4" x 12" Norton Norax Belts included in the kit. The Norton Norax Belts utilize very consistent aluminum oxide abrasives. The belts have a depth to the abrasive surface unlike any other belts we carry. The depth to the abrasives allows the abrasives to break away and expose fresh abrasives below. This abrasive configuration allows it to run cooler, last 2 to 5 times longer, leave a very consistent finish and even cut faster. They are just great belts.
X65 Norax Belt - This 3/4" x 12" belt features 65 micron aluminum oxide abrasive particles. This translates to roughly a P220 grit. This is a coarse belt that can be used for most coarse sharpening needs.
X22 Norax Belt - This 3/4" x 12" belt features 22 micron aluminum oxide abrasive particles. This translates to roughly a P800 grit. This is a fine to medium belt that can be used to refine a coarsely sharpened edge or refine an edge that is starting to dull.
X4 Norax Belt - This 3/4" x 12" belt features 4 micron aluminum oxide abrasive particles. This translates to roughly a P3000 grit. This is a very fine belt that can be used to put a very fine edge that is almost mirror polished.
6000 Grit Belt
The 6000 grit belt is used to put the finest razor sharp edge on your knives. This 1/2" x 12" thinner belt conforms to your knives so it can be used to sharpen serrated edges as well as heavily curved edges like gut hooks.
As always, Work Sharp includes great printed instructions with your sharpener. The instructions make it easy to go from novice to pro in a short amount of time. There are plenty of easy-to-follow illustrations that really help explain how to use the sharpener.
All Work Sharp products are assembled in the USA in Ashland, Oregon with many US components.
Sharpening Supplies is an authorized U.S. distributor for Work Sharp. We do not ship Work Sharp products internationally.
The Work Sharp Ken Onion Edition comes with a 1 year warranty.
This tool plugs in to any 120V outlet. It can even be used in your car or truck with a small power inverter. This product ships to US only.
COMPARE: Work Sharp Knife Sharpeners WSCMB, WSKTS, WSKTS-KO
Q. Can this sharpener also sharpen scissors?
A. Yes, the guide system has a slot for scissors. The guide gives you a very precise edge.
Q. Can I use my old belts from the WSKTS (original Work Sharp Knife and Tool Sharpener)?
A. The older units use a smaller 1/2" wide belt. In fact the Ken Onion Edition uses the same flexible 1/2" belt for the 6000 grit. However, the Ken Onion Edition was designed to work with the wider 3/4" belts for the other grits. So while technically possible, it does perform better with the belts designed for it.
Q. Are additional grits available?
A. Yes. In addition to the 5 grits that come with the Ken Onion, belts are now available in an even finer grit. The 12,000 Grit Ultra-Fine Micro-Mesh belts.