Call Us Today! 1-800-351-8234
Why Choose Us? 1. Products Tested and Guaranteed 2. Free Product Support 3. Same Day Shipping 4. Free Shipping on Orders Over $99
Home > Sharpening Articles > Sharpening a Knife Using the Aligner

How to Sharpen a Knife Using the Aligner

The Aligner maintains a consistent sharpening angle, taking the guesswork out of sharpening. Choose from seven different settings to get your perfect edge. You can set the bevel guide closer to the clamp for a sharper edge, or you can set it farther away for a more durable edge. Follow these step-by-step instructions to take advantage of your Aligner kit:

Step 1: Loosen the thumb screw on the clamp.

Step 2: While holding the knife handle, place the clamp over the middle of the knife blade's back edge.

Step 3: Rest the back of the clamp on a table and tighten the thumb screw until the knife is secure within the clamp.

Step 4: Adjust the bevel guides to one of seven settings. Now you're ready to sharpen...

Step 5: Pick up the clamp and your preferred stone and gently glide stone from point A to point B. Lift the stone to point C and gently glide the stone to point D. Continue this stroke along the length of the knife's edge.

Step 6: Turn the knife over to sharpen the other side. (Make sure your bevel guides are on the same settings)

Step 7: Finish the edge with one long stroke on each side of the blade.

Step 8: If desired, switch to a finer stone to continue the sharpening process.

Step 9: When done, carefully loosen the thumb screw and remove your sharpened knife from the clamp.

Wow! Your are fast and your communication is excellent. The item arrived today (IM200) and it is a great tool -- my knives are sharp again! Thank you so much for a wonderful item and fine service.
Penny M, St Paul, MN