Resources

  • Sharpening Articles
  • Sharpening Videos
Home / Replacement Parts / Lansky Replacement Stones and Parts / Lansky Multi-Angle Knife Clamp
Lansky Multi-Angle Knife Clamp
Item #: LP006
Price: $11.99 $10.99
Stock Status: In Stock
 
  • Lansky's Original Design
  • Handles Blades 1/2" and Narrower

Lansky's Original Design Knife Clamp

This is the original design of the Lansky Knife Clamp. Due to popular demand, this now the standard clamp included in Lansky sharpening kits. Some Lansky users prefer this design as it is capable of holding blades 1/2" wide and under. A screw driver is required for the forward screw.

Lansky also offers a Soft Grip Knife Clamp that is recommended for blades that are highly polished or coated.

Directions:

Loosen the front screw screw 2-3 turns. Tighten the back red thumb screw until it is approximately one full turn from being fully tightened. Loosen the front screw of the knife clamp again to accommodate thickness of blade. Attach the clamp to the spine of the knife blade at the center of the blade. Approximately ½ inch of the blade should extend from the end of the clamp. Tighten the front screw again to hold the knife securely. Lock the blade in place by hand tightening the back red thumb screw on the clamp.

Additional Categories

Need more information?

Phone Support

Call a Product Specialist

Monday through Friday, 8 a.m. - 4:30 p.m.
Phone US: 1-800-351-8234
Outside US: +1-608-203-1129
Email support

Email a Product Specialist

productspecialist@sharpeningsupplies.com
Emails are answered Monday through Friday
I had a wonderful experience with your salesperson. He treated me with courtesy, showed care about my needs, and taught in a polite manner. His patience is commendable and his knowledge is a real asset. Thank you much!
Cesar A, Oak Forest, IL